Printer Potty installation guide for the Epson Workforce WF-7015
Remove both screws indicated
Remove both screws indicated
Remove the top and bottom screws to release the waste pad holder and base cover.
Release base cover
Release base cover
Slide the base cover to the back of the printer as shown by the arrow.
Base cover released
Base cover released
The cover will slide back and drop off the printer as shown
Waste pad holder removed
Waste pad holder removed
With the retaining screw already removed the waste pad holder will usually fall out with minimal encouragement
Waste tube location
Waste tube location
From below, looking up into the area vacated by the waste pad holder.
The waste tube is identified by the arrow. There is very little excess/slack (2cm/1″ max)
